Low dyeing tension

The specially designed low-position front fabric tank minimizes the height difference between the fabricdelivery wheel and the fabric tank, shortens the distance between them, and reduces the cyclic tension of the fabric during reciprocating movement. The fabric runs under low tension, allowing the fibers to loosen, reducing friction and entanglement between fabrics, minimizing creases, and resulting in smooth fabric surface and good hand feel.

Enhanced fabric relaxation effect for more even dyeing

The specially designed square fabric guiding tube allows the fabric tobe systematically laid out in the tank in a relaxed state, reducing fabric entanglement and friction. Utilizing the jetting effect of the high-lift water pump improves the fabric's color absorption rate and ensures more uniform dyeing.

Wide speed adjustment range

With the square fabric guiding tube, the fabric can be arranged and stacked regularly even athigh speeds. Combined with the control of the fabric delivery motor, the fabric speed can be adjusted arbitrarily within the range of 50-550 meters/minute. 

Low bath ratio

The unique double-layered inner fabric tank structure facilitates easy liquid discharge, accelerates the circulation speed of the dye liquor, and controls the bath ratio within the range of 1-4.5~5.

Adjustable nozzle gap

The nozzle pressure can be adjusted from 0.5 ~4Kg/m', achieving optimal results by adjusting the gapaccording to different fabrics and processes.

Low dyeing tension

The specially designed low-position front fabric tank minimizes the height difference between the fabricdelivery wheel and the fabric tank, shortens the distance between them, and reduces the cyclic tension of the fabric during reciprocating movement. The fabric runs under low tension, allowing the fibers to loosen, reducing friction and entanglement between fabrics, minimizing creases, and resulting in smooth fabric surface and good hand feel.

Enhanced fabric relaxation effect for more even dyeing

The specially designed square fabric guiding tube allows the fabric tobe systematically laid out in the tank in a relaxed state, reducing fabric entanglement and friction. Utilizing the jetting effect of the high-lift water pump improves the fabric's color absorption rate and ensures more uniform dyeing.

Wide speed adjustment range

With the square fabric guiding tube, the fabric can be arranged and stacked regularly even athigh speeds. Combined with the control of the fabric delivery motor, the fabric speed can be adjusted arbitrarily within the range of 50-550 meters/minute. 

Low bath ratio

The unique double-layered inner fabric tank structure facilitates easy liquid discharge, accelerates the circulation speed of the dye liquor, and controls the bath ratio within the range of 1-4.5~5.

Adjustable nozzle gap

The nozzle pressure can be adjusted from 0.5 ~4Kg/m', achieving optimal results by adjusting the gapaccording to different fabrics and processes.

染色张力低

特殊设计的低位前储布槽，使提布轮与布槽高度差降至极低，布槽与提布轮之间距离缩短，减少了织物在往复运行时的循环张力。织物在低张力下运行，而使纤维变得松散，减少织物之间的搓揉与缠绕，减少折痕的产生，使布面平顺，手感好。

织物在处染过程中松驰效果使染色更透更均匀

特殊设计的方形导布管，使织物在松驰状态下，有序平铺在缸内布槽中，减少织物相互缠绕而搓揉。借用高扬程水泵的喷射作用，提高织物的上色率，织物染色更均匀。

调节速度幅度大

利用方形导布管，使织物在高速运行中有规则地排列堆置，加之提布电机的控制，布速在50-550m/min内任意调节。

极低浴比

独特设计的双夹层内布槽结构，使染液析出方便，加快染液的循环速度，浴比控制在1-4.5~5。

喷嘴间隙可调

根据不同织物和工艺调节间隙喷嘴压力0.5~4Kg/m？，以达到最佳效果。